Input:5VDC 1A
USB3.1 output:5VDC0.5A/1A
working LED indicator :Green
Cooling working power:0.25W
Manual transmission:Manual low or high range
intelligently buttons:Fan works intelligently
material:ABS
Product size: 280*62*9MM
Box size:30.1×8.3×3.5cm
Product weight:102g,144g with box
features:
1.Personalized design: uses NTC sensor to work intelligently;
2.Product material: precision electrical components, fireproof circuit board, imported environmentally friendly ABS plastic;
3.Product features: safe and stable USB3.1 standard extended functions;
4.Product efficiency: up to 95%.
Instructions:
1. The USB input and output ports use the original USB3.1 interface. Install the radiator product on the host and turn the switch to the working position.
2. Two modes, one is ON mode and the other is AOUT mode.
3. When the switch is turned to ON mode, the fan operation is controlled at low output. When the right button is pressed, the fan operation is controlled at high output (note that after the PS5 console has been used to enter standby mode, the power supply of the PS5 console will turn off when the controller is used to wake it up again. After restarting, the PS5 radiator will also be powered off and restarted to switch to low output). When the right button is pressed again, the fan will return to the low output control. The button only has the function of cycling through low/high gears.
4. When the switch is set to AOUT mode, the fan will intelligently control the output according to the temperature of the temperature sensor. When the temperature sensor detects that the temperature is less than 35 degrees, the radiator fan stops working; when the greenhouse sensor detects that the temperature is greater than 35 degrees, the radiator fan starts working; when the temperature sensor detects that the temperature is above 45 degrees, the radiator fan works at full speed.
