*controller battery life: about 36 hours
*Charging current: Helmet: Max 1.4A controller: Max 500mA
*Charging time: helmet: about 3.5 hours controller: about 2.5 hours
Dock charge indicator
*Standby mode: green light
Packing list: Charging stand …..X1
Battery …..X2
Battery cover …..X2
USB Type C Magnetic Head…………X4
Magnetic pick-up needle…….X1
1.2m charging cable…..X1
Instruction Manual…..X1
1. When the charging stand charges the VR helmet and two handles at the same time, in order to provide sufficient current, the charging stand must be equipped with a charger with an output of more than 5V2A. Required charger output: 5V>2A
2. The original charger provided in the 0culusQuest2 package can be used for this charging stand
Steps to charge the helmet
1. Connect the charger above 5V2A to the charging seat (the charger is not included in this package, the customer needs to purchase it separately). The charging seat turns on the green light and enters the power-on standby state
2. Insert the Type-c magnetic head into the charging hole of the helmet
3. Put the helmet vertically into the corresponding charging position of the charging base. When charging starts,
The charging LED indicator lights up yellow
Steps to charge the handle
1. Connect the charger with 5V2A or above to the charging seat (the charger is not included in this package, customers need to purchase it separately). The charging seat turns on the green light and enters the power-on standby state
2. Slide the battery cover of the handle down and take out the battery cover
3. Install the battery for the handle. When installing, please pay attention to the Type-C charging port of the battery as far as possible.
4. Install the battery cover provided in this package on the handle
5. Use the needle provided in this package to adjust the Type-C charging port of the battery to align with the hole of the battery cover
6. Insert the magnetic head into the Type-C charging port of the battery through the hole of the battery cover
7. Put the handle into the corresponding charging position of the charging base and let the magnetic suction head contact to charge.
At the beginning, the LED indicator of the cradle will light up yellow (please note that the handle is divided into left and right, please place the handle according to the “L” and “R” marks on the cradle)
If you want to take out the magnetic head of the handle, please use the needle provided in the package to pick out the magnetic head
